P a g e | 336
UCM630X Series User Manual
Version 1.0.2.25
Table 117: API Configuration Parameters
CDR HTTP API Settings (Old)
Enable/Disable API. The default setting is disabled.
Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
interfaces. The port number is optional, and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the
TLS socket will not bind to multiple IP addresses. The default setting is 0.0.0.0:8443.
Configure the username for TLS authentication. If not configured, authentication will
be skipped.
Configure the password for TLS authentication. This is optional.
Specify a list of IP addresses permitted by CDR and REC API. This creates an API-
specific access control list. Multiple entries are allowed.
For example, "192.168.40.3/255.255.255.255" denies access from all IP addresses
except 192.168.40.3.
The default setting is blank, meaning all IP addresses will be denied.
Upload TLS private key. The size of the key file must be under 2MB. This file will be
renamed as 'private.pem' automatically.
To Next Page
Loading...
Need help?
General
