P a g e | 76
UCM630X Series User Manual
Version 1.0.2.25
Time Settings
Automatic Date and Time
The current system time on the UCM630X can be found under Web GUISystem StatusDashboardPBX
Status.
To configure the UCM630X to update time automatically, go to Web GUISystem SettingsTime
SettingsAutomatic date and Time.
---------------------------------------------------------------------------------------------------------------------------------------------------
Note:
The configurations under Web GUISettingsTime Settings Automatic date and Time page require
reboot to take effect. Please consider configuring auto time updating related changes when setting up the
UCM630X for the first time to avoid service interrupt after installation and deployment in production.
--------------------------------------------------------------------------------------------------------------------------------------------------
Table 18: Time Auto Updating
Specify the URL or IP address of the NTP server for the UCM630X to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
If set to "Yes", the UCM630X can get provisioned for Time Zone from
DHCP Option 2 in the local server automatically. The default setting is
"Yes".
If set to "Yes", the UCM630X can get provisioned for NTP Server from
DHCP Option 42 in the local server automatically. This will override the
manually configured NTP Server. The default setting is "Yes".
Select the proper time zone option so the UCM630X can display correct
time accordingly.
If "Self-Defined Tome Zone" is selected, please specify the time zone
parameters in "Self-Defined Time Zone" field as described in below option.
Set Date and Time
To manually set the time on the UCM630X, go to Web GUISystem SettingsTime SettingsSet Date and
Time. The format is YYYY-MM-DD HH:MM:SS.
To Next Page
Loading...
Need help?
General
