P a g e | 239
UCM630X Series User Manual
Version 1.0.2.25
voicemail box. But if the caller is calling from outside the system and the incoming call is routed by DID to the
destination extension, then the caller will be prompted with the choice to either press1 to access voicemail
management or press 2 to leave a message for the called extension. This feature could be useful for remote
voicemail administration.
Voicemail Email Settings
The UCM630X can be configured to send the voicemail as attachment to Email. Click on "Voicemail Email
Settings" button to configure the Email attributes and content.
Table 76: Voicemail Email Settings
If enabled, voicemail will be sent to the user's email address. Note: SMTP
server must be configured to use this option.
Keep Voicemail after
Emailing
Enable this option if you want to keep recording files after the Email is sent.
The default setting is Enable.
Fill in the "Subject:" and "Message:" content, to be used in the Email when
sending to the user.
The template variables are:
\t: TAB
${VM_NAME}: Recipient's first name and last name
${VM_DUR}: The duration of the voicemail message
${VM_MAILBOX}: The recipient's extension
${VM_CALLERID}: The caller ID of the person who has left the message
${VM_MSGNUM}: The number of messages in the mailbox
${VM_DATE}: The date and time when the message is left
To Next Page
Loading...
Need help?
General
