Grandstream Networks UCM63 Series User Manual

P a g e | 130
UCM630X Series User Manual
Version 1.0.2.25
Use Callee DOD
for Follow Me
Use the callee DOD number as CID if configured Follow Me numbers are external
numbers.
New Follow Me
Number
Add a new Follow Me number which could be a "Local Extension" or an "External
Number". The selected dial plan should have permissions to dial the defined external
number.
Dialing Order
This is the order in which the Follow Me destinations will be dialed to reach the user.
Create New FXS Extension
The UCM630X supports Foreign eXchange Subscriber (FXS) interface. FXS is used when user needs to connect
analog phone lines or FAX machines to the UCM630X.
To manually create new FXS user, go to Web GUIExtension/TrunkExtensions. Click on "Add" and a new
dialog window will show for users which need to make sure first to select the extension type to be FXS Extension
before proceeding to fill in the extension information. The configuration parameters are as follows.
Table 43: FXS Extension Configuration ParametersBasic Settings
General
Extension
The extension number associated with the user.
Analog Station
Select the FXS port to be assigned for this extension.
Caller ID Number
Configure the CallerID Number that would be applied for outbound calls from this
user.
Note: The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Permission
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
to make outbound calls using this rule.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
 Disable Voicemail: Disable Voicemail.
 Enable Local Voicemail: Enable voicemail for the user.
Voicemail
Password
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the random generated password for security purpose.
Skip Voicemail
Password
When user dials voicemail code, the password verification IVR is skipped. If enabled,
this would allow one-button voicemail access. By default, this option is disabled.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English