Grandstream Networks UCM63 Series User Manual

P a g e | 131
UCM630X Series User Manual
Version 1.0.2.25
Verification
Send Voicemail to
Email
Send voicemail messages to the configured email address. If set to "Default", the
global setting will be used. Global settings can be found in Voicemail->Voicemail
Email Settings.
Keep Voicemail
after Emailing
Only applies if extension-level or global Send Voicemail to Email is enabled.
Emergency Calls
CID
CallerID number that will be used when calling out and receiving direct callbacks.
Disable This
Extension
If selected, this extension will be disabled on the UCM630X.
Note: The disabled extension still exists on the PBX but cannot be used on the end
device.
User Settings
First Name
Configure the first name of the user. The first name can contain characters, letters,
digits and _.
Last Name
Configure the last name of the user. The last name can contain characters, letters,
digits and _.
Email Address
Fill in the Email address for the user. Voicemail will be sent to this Email address.
User Password
Configure the password for user portal access. A random numeric password is
automatically generated. It is recommended to use the randomly generated password
for security purpose.
Mobile Phone
Number
Configure the Mobile number of the user.
Language
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUIPBX
SettingsVoice PromptLanguage Settings. The dropdown list shows all the
current available voice prompt languages on the UCM630X. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUIPBX SettingsVoice PromptLanguage Settings.
Table 44: FXS Extension Configuration ParametersMedia
Analog Settings
Call Waiting
Configure to enable/disable call waiting feature. The default setting is "No".
User ‘#’ as SEND
If configured, the # key can be used as SNED key after dialing the number on the
analog phone. The default setting is "Yes".
RX Gain
Configure the RX gain for the receiving channel of analog FXS port. The valid range
is -30dB to +6dB. The default setting is 0.
TX Gain
Configure the TX gain for the transmitting channel of analog FXS port. The valid range
is -30dB to +6dB. The default setting is 0.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English