Grandstream Networks UCM63 Series User Manual

P a g e | 377
UCM630X Series User Manual
Version 1.0.2.25
 Detect Cycle: The UCM will detect the event at each cycle based on the specified time. Users can
enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Click on the switch to turn on/off the alert and Email notification for the event. Users could
also select the checkbox for each event and then click on button "Alert On", "Alert Off", "Email Notification
On", "Email Notification Off" to control the alert and Email notification configuration.
Alert Log
Under Web GUIMaintenanceSystem EventsAlert Log, system messages from triggered system events
are listed as alert logs. The following screenshot shows system crash alert logs.
Figure 267: System EventsAlert Log
User could also filter alert logs by selecting a certain event category, type of alert log, and/or specifying a certain
time period. The matching results will be displayed after clicking on . Alert logs are classified into two
types by the system:
1. Generate Alert: Generated when alert events happen, for example, alert logs for disk usage exceeding the
alert threshold.
2. Restore to Normal: Generated when alert events being cleared, for example, logs for disk usage dropping
back below the alert threshold.
User could filter out alert logs of “Generate Alert” or “Restore to Normal” by specifying the type according to
need. The following figure shows an example of filtering out alert logs of type of “Restore to Normal”.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English