Grandstream Networks UCM63 Series User Manual

P a g e | 364
UCM630X Series User Manual
Version 1.0.2.25
Announcements Center Settings
Table 129: Announcements Center Settings
Name
Configure a name for the newly created Announcements Center to identify this
announcement center.
Code
Enter a code number for the custom prompt. This code will be used in
combination with the group number. For example, if the code is 55, and group
number is 666. The user can dial 55666 to send prompt 55 to all members in
group 666.
Note:
The combination number must not conflict with any number in the system such
as extension number or conference number.
Custom Prompt
This option is to set a custom prompt as an announcement to notify group
members. The file can be uploaded from page ‘Custom Prompt’. Click ‘Prompt’
to add additional record.
Ring Timeout
Configure the ring timeout for the group members. The default value is 30
seconds.
Auto Answer
If set to Yes the Auto answer will be enabled by the members.
Group Settings
Table 130: Group Settings
Name
Configure a name for the newly created group to identify the group.
Note: Name cannot exceed 64 characters.
Number
Configure the group number. The group number is used in combination with the
code. For example, if group number is 666, and code is 55. The user can dial
55666 to send prompt 55 to all members in group 666.
Note:
The combination number must not conflict with any number in the system such
as extension number or conference number and cannot exceed 64 characters.
Members
Select the group members from the available list.
Announcements Center feature can be found under Web GUIValue-added FeaturesAnnouncements
Center. The following example demonstrates the usage of this feature.
1. Click to add new group.
2. Give a name to the newly created group.
3. Create a group number which is used with code to send voice message.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English