Grandstream Networks UCM63 Series User Manual

P a g e | 61
UCM630X Series User Manual
Version 1.0.2.25
10010
gs_avs
udp/ipv4
gs_avs
10012
gs_avs
udp/ipv4
gs_avs
10013
gs_avs
udp/ipv4
gs_avs
10014
gs_avs
udp/ipv4
gs_avs
10015
gs_avs
udp/ipv4
gs_avs
10018
gs_avs
udp/ipv4
gs_avs
10019
gs_avs
udp/ipv4
gs_avs
10020
gs_avs
udp/ipv4
gs_avs
6066
python
udp/ipv4
python
3306
mysqld
tcp/ipv4
mysqld
45678
python
udp/ipv4
python
8439
lighttpd
tcp/ipv4
HTTP
8088
asterisk
tcp/ipv4
SIP
8888
pbxmid
tcp/ipv4
pbxmid
25
master
tcp/ipv4
master
636
slapd
tcp/ipv4
SLDAP
4569
asterisk
udp/ipv6
SIP
42050
asterisk
udp/ipv6
SIP
7681
pbxmid
tcp/ipv4
pbxmid
For typical firewall settings, users could configure the following options on the UCM630X.
Table 13: Typical Firewall Settings
Ping Defense
Enable
If enabled, ICMP response will not be allowed for Ping request. The default
setting is disabled. To enable or disable it, click on the check box for the LAN or
WAN (UCM630X) interface.
SYN-Flood
Defense Enable
Allows the UCM630X to handle excessive amounts of SYN packets from one
source and keep the web portal accessible. There are two options available and
only one of these options may be enabled at one time.
 eth(0)LAN defends against attacks directed to the LAN IP address of the
UCM630X.
 eth(1)WAN defends against attacks directed to the WAN IP address of the
UCM630X.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English