Grandstream Networks UCM63 Series User Manual

P a g e | 77
UCM630X Series User Manual
Version 1.0.2.25
Figure 45: Set Time Manually
---------------------------------------------------------------------------------------------------------------------------------------------------
Note:
Manually setup time will take effect immediately after saving and applying change in the Web GUI. If users would
like to reboot the UCM630X and keep the manually setup time setting, please make sure "Remote NTP Server",
"Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUISettingsTime
SettingsAuto Time Updating page are unchecked or set to empty. Otherwise, time auto updating settings in
this page will take effect after reboot.
--------------------------------------------------------------------------------------------------------------------------------------------------
NTP Server
The UCM630X can be used as an NTP server for the NTP clients to synchronize their time with. To configure
the UCM630X as the NTP server, set "Enable NTP server" to "Yes" under Web GUISystem SettingsTime
SettingsNTP Server. On the client side, point the NTP server address to the UCM630X IP address or host
name to use the UCM630X as the NTP server.
Office Time
On the UCM630X, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to Web
GUISystem SettingsTime SettingsOffice Time. Click on "Add" to create an office time.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English