Grandstream Networks UCM63 Series User Manual

P a g e | 252
UCM630X Series User Manual
Version 1.0.2.25
Table 82: Announcement Paging Configuration Parameters
Enable
Enable/Disable Announcement Paging.
Name
Configure paging/intercom group name.
Type
Select "Announcement Paging”
Custom Prompt
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on ‘Prompt’, it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX SettingsVoice PromptCustom
Prompt, where they could record new prompt or upload prompt files.
Repeat
If enabled, the announcement page will be repeated for the selected weekdays.
Date
Configure Announcement Paging Date.
Time
Configure Announcement Paging Time.
Transmission Method
Configure Announcement Paging transmission method.
Unicast: Depending on members selection
Multicast: Depending on Multicast IP address and Port
Members
Select available users from the left side to the paging/intercom group member
list on the right.
Configure Private Intercom
Private Intercom is a new paging type that is meant to be used with Grandstream GSC3510. In a private intercom:
 The initiator can be heard by all parties
 The initiator can hear only one of the intercom members, which is determined by whose audio is initially
detected. Audio from other members cannot be heard until the first responder is done talking.
 Intercom members can hear only the initiator’s audio and no other intercom members
Figure 161: Private Intercom

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English