P a g e | 309
UCM630X Series User Manual
Version 1.0.2.25
5. Next, configure the VPK or MPK to Shared for both the main extension and the private number. SCA is
now configured for both endpoint devices.
The following table describe the SCA Number configuration setting:
Table 98: Add SCA Private Number
Configures the private number for the SCA.
Display the related shared line.
Whether enable this private number. If not enabled, this private
number is only record in DB, it will not affect other system feature.
Allow Origination from This
Number
Enable this option will allow calling from this private number. By
default, it is enabled.
Allow Termination to This
Number
Enable this option will allows calls to this private number. By default,
it is enabled.
The following table describes the options available when editing the SCA number:
Table 99: Editing the SCA Number
While SCA is enabled, this number will be the same as the
extension number.
Allow Call Retrieve from Another
Location
Allows remote call retrieval. Must be enabled in public hold. By
default, it is enabled.
Alert All Appearances for Group
Paging Calls
Allows all SCA group members to ring when the SCA shared
number is paged. If disabled, only the SCA shared number will ring
when paged. By default, it is disabled.
Multiple Call Arrangement
Allows simultaneous calls in an SCA group. By default, it is disabled.
Allow Bridging between
Locations
Allows location bridging for SCA group. Must be enabled when
using the Barge-In feature. By default, it is disabled.
Configures the notification in the bridge when another party join.
None: No notification sound.
Barge-In only: Notification sound will play when another
party join.
Barge-In and Repeat: Notification sound will play when
another party joins and repeat every 30 seconds.
By default, it is set to “Barge-In Only”.
To Next Page
Loading...
Need help?
General
