P a g e | 286
UCM630X Series User Manual
Version 1.0.2.25
Table 93: Emergency Numbers Parameters
Configure the name of the emergency call.
For example, "emergency911","emergency211" and etc.
Config the emergency service number. For example,"911","211" and etc.
Select the emergency level of the number. Level "3" means the most
urgent.
If this option is not enabled, when the lines of trunks which the coming
emergency call routes by are completely occupied, the line-grabbing
function will automatically cut off a line from all busy lines so that the
coming emergency call can seize it for dialing out. This option is not
enabled by default.
This option sets a custom prompt to be used as an announcement to the
person receiving an emergency call. The file can be uploaded from the
page "Custom Prompt". Click "Prompt" to add additional record.
Select the trunks for the emergency call. Select one trunk at least and
select five trunks at most.
Select the members who will be notified when an emergency call occurs.
Specify the number of digits that will be Stripped from the beginning of the
dialed number before the call is placed via the selected trunk.
Specify the digits to be Prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
When enabled, emergency call will be automatically recorded.
When enabled recording files will be sent to the configured email address.
The email address to where the recording files will be sent.
Figure 191: 911 Emergency Sample
To Next Page
Loading...
Need help?
General
