Grandstream Networks UCM63 Series User Manual

P a g e | 112
UCM630X Series User Manual
Version 1.0.2.25
After the above configurations, save the changes and go back to Web GUIValue-added FeaturesZero
ConfigZero Config page. Users could then click on to send NOTIFY to the SIP end point device and
trigger the provisioning process. The device will start downloading the generated configuration file from the URL
contained in the NOTIFY message.
Figure 72: Device List in Zero Config
In this web page, users can also click on “Reset All Extensions” to reset the extensions of all the devices.
Sample Application
Assuming in a small business office where there are 8 GXP2140 phones used by customer support and 1
GXV3275 phone used by customer support supervisor. 3 of the 8 customer support members speak Spanish
and the rest speak English. We could deploy the following configurations to provisioning the office phones for
the customer support team.
1. Go to Web GUIValue-added FeaturesZero ConfigZero Config Settings, select “Enable Zero
Config”.
2. Go to Web GUIValue-added FeaturesZero ConfigGlobal Policy, configure Date Format, Time
Format and Firmware Source as follows.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English