Grandstream Networks UCM63 Series User Manual

P a g e | 93
UCM630X Series User Manual
Version 1.0.2.25
Figure 60: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 24: Global Policy Parameters – Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.
Enable NTP
To enable the NTP service.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
NTP Update Interval
Configure the NTP update interval.
Time Zone
Configure the time zone used on the SIP end device.
Enable Daylight Saving Time
Select either to enable or disable the DST.
Table 25: Global Policy Parameters – Phone Settings
Default Call Settings
Dial Plan
Configure the default dial plan rule. For syntax and examples, please refer
to user manual of the SIP devices to be provisioned for more details.
Enable Call Features
When enabled, “Do Not Disturb”, “Call Forward” and other call features can
be used via the local feature code on the phone. Otherwise, the ITSP
feature code will be used.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English