P a g e | 191
UCM630X Series User Manual
Version 1.0.2.25
Specify the digits to be prepended before the call is placed via the trunk. Those
digits will be prepended after the dialing number is stripped.
Use Main Trunk or Failover Trunk: Use the Main Trunk and its settings during the
configured time conditions. If the main trunk is unavailable, the Failover Trunk and
its settings will be used instead.
Use Specific Trunks: Use specific trunks during the configured time conditions.
The Strip and Prepend settings of the Main Trunk will be used. If a trunk is
unavailable during its time condition, no failover trunks will be used.
Outbound Blacklist
The UCM630X allows users to configure blacklist for outbound routes. If the dialing number matches the blacklist
numbers or patterns, the outbound call will not be allowed. The outbound blacklist can be configured under UCM
Web GUIExtension/TrunkOutbound Routes: Outbound Blacklist.
Users can configure numbers, patterns or select country code to add in the blacklist. Please note that the blacklist
settings apply to all outbound routes.
Figure 105: Country Codes
To Next Page
Loading...
Need help?
General
