P a g e | 253
UCM630X Series User Manual
Version 1.0.2.25
Paging/Intercom Group Settings
Figure 162: Page/Intercom Group Settings
The UCM630X has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81 and the
Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the "Paging/Intercom
Group Settings" dialog. Or users could go to Web GUICall FeaturesFeature Codes directly.
Configure a Scheduled Paging/Intercom
Users can schedule paging/intercom calls by using the Schedule Paging/Intercom page. To schedule, click the
Add button on the new page and configure the caller, the group to use, and the time to call out.
Figure 163: Schedule Paging/Intercom page
Table 83: Schedule Paging / Intercom Settings
Configure the caller ID for the paging / intercom group.
Select the paging / intercom group from the list of the available groups.
Configure the start time of the scheduled paging / intercom call.
Select the type for the scheduled paging / intercom call. The available types are:
Single time or Daily basis. Default is “Single”.
Display the action status of the scheduled paging / intercom call.
To Next Page
Loading...
Need help?
General
