P a g e | 68
UCM630X Series User Manual
Version 1.0.2.25
If users have the Grandstream phone provisioned by the UCM630X, the LDAP directory will be set up on the
phone and can be used right away for users to access all phonebooks.
Additionally, users could manually configure the LDAP client settings to manipulate the built-in LDAP server on
the UCM630X. If the UCM630X has multiple LDAP phonebooks created, in the LDAP client configuration, users
could use "dc=pbx,dc=com" as Base DN to have access to all phonebooks on the UCM630X LDAP server, or
use a specific phonebook DN, for example "ou=people,dc=pbx,dc=com", to access to phonebook with
Phonebook DN "ou=people,dc=pbx,dc=com " only.
UCM can also act as a LDAP client to download phonebook entries from another LDAP server.
To access LDAP server and client settings, go to Web GUISettingsLDAP Server.
LDAP Server Configurations
The following figure shows the default LDAP server configurations on the UCM630X.
Figure 33: LDAP Server Configurations
The UCM630X LDAP server supports anonymous access (read-only) by default. Therefore, the LDAP client
does not have to configure username and password to access the phonebook directory. The "Root DN" and
To Next Page
Loading...
Need help?
General
