Grandstream Networks UCM63 Series User Manual

P a g e | 122
UCM630X Series User Manual
Version 1.0.2.25
DND Whitelist
If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple
numbers are supported and must be separated by new lines. Pattern matching is
supported.
 Z match any digit from 1-9，
 N match any digit from 2-9，
 X match any digit from 0-9.
FWD Whitelist
Calls from users in the forward whitelist will not be forwarded. Pattern matching is
supported.
 Z match any digit from 1-9，
 N match any digit from 2-9，
 X match any digit from 0-9.
CC Settings
Enable CC
If enabled, UCM630X will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default, it
is disabled.
CC Mode
Two modes for Call Completion are supported:
 Normal: This extension is used as ordinary extension.
 For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC requests
this channel can make.
The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for this
device. In other words, this number tells how many callers may request CC services
for a specific device at one time.
The minimum value is 1.
Ring Simultaneously
Ring
Simultaneously
Enable this option to have an external number ring simultaneously along with the
extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
External Number
Set the external number to be rang simultaneously. ‘-’ is the connection character
which will be ignored.
This field accepts only letters, numbers, and special characters + = * #.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English