Grandstream Networks UCM63 Series User Manual

P a g e | 199
UCM630X Series User Manual
Version 1.0.2.25
 Conference
 Call Queue
 Ring Group
 Paging/Intercom Groups
 IVR
 Voicemail Groups
 Dial By Name
 All
Default Destination
Select the default destination for the inbound call.
 Extension
 Voicemail
 Conference Room
 Call Queue
 Ring Group
 Paging/Intercom
 Voicemail Group
 DISA
 IVR
 External Number
 By DID
When "By DID" is used, the UCM will look for the destination based on
the number dialed, which could be local extensions, conference, call
queue, ring group, paging/intercom group, IVR and voicemail groups as
configured in "DID destination". If the dialed number matches the DID
pattern, the call will be allowed to go through.
 Dial By Name
 Callback
Strip
Specify the number of digits to strip from the beginning of the DID. This is
used when "By DID" is selected in "Default Destination".
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Time Condition
Start Time
Select the start time "hour:minute" for the trunk to use the inbound rule.
End Time
Select the end time "hour:minute" for the trunk to use the inbound rule.
Date
Select "By Week" or "By Day" and specify the date for the trunk to use the
inbound rule.
Week
Select the day in the week to use the inbound rule.
Destination
Select the destination for the inbound call under the defined time condition.
 Extension

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English