Grandstream Networks UCM63 Series User Manual

P a g e | 299
UCM630X Series User Manual
Version 1.0.2.25
Disconnect
 Default code: *0
 Enter the code during active call. It will disconnect the call.
 Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Call Park
 Default code: #72
 Enter the code during active call to park the call.
 Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Start/Stop Call Recording
 Default code: *3
 Enter the code followed by # or SEND to start recording the
audio call and the UCM630X will mix the streams natively on
the fly as the call is in progress.
 Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Feature Code Digits Timeout
Set the maximum interval (ms) between digits for feature code
activation
DND/Call Forward
Do Not Disturb (DND) Activate
 Default code: *77
Do Not Disturb (DND) Deactivate
 Default code: *78
Call Forward Busy Activate
 Default Code: *90
 Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
 Default Code: *91
Call Forward No Answer Activate
 Default Code: *92
 Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English