EasyManuals Logo
Home>Grandstream Networks>PBX>UCM63 Series

Grandstream Networks UCM63 Series User Manual

Grandstream Networks UCM63 Series
423 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
P a g e | 97
UCM630X Series User Manual
Version 1.0.2.25
Upgrade via
When URL is selected as firmware source, configure upgrade via TFTP,
HTTP or HTTPS.
Server Path
When URL is selected as firmware source, configure the firmware
upgrading server path.
File Prefix
Configure the Config Server Path.
Config Server Path
When URL is selected as firmware source, configure the firmware file
postfix. If configured, only the configuration file with the matching encrypted
postfix will be downloaded and flashed into the phone.
Allow DHCP Option 43/66
If DHCP option 43 or 66 is enabled on the LAN side, the TFTP server can
be redirected.
Automatic Upgrade
If enabled, the end point device will automatically upgrade if a new firmware
is detected. Users can select automatic upgrading by day, by week or by
minute.
By week
Once selected, specify the day of the week to check HTTP/TFTP
server for firmware upgrades or configuration files changes.
By day
Once selected, specify the hour of the day to check the HTTP/TFTP
server for firmware upgrades or configuration files changes.
By minute
Once selected, specify the interval X that the SIP end device will
request for new firmware every X minutes.
Firmware Upgrade Rule
Specify how firmware upgrading and provisioning request to be sent.
Zero Config
Select either to enable or disable zero config.
Web Access
Admin Password
Configure the administrator password for admin level login.
End-User Password
Configure the end-user password for the end user level login.
Web Access Mode
Select HTTP or HTTPS as the web access protocol.
Web Server Port
Configure the port for web access.
The valid range is 1 to 65535.
RTSP Port
Configure the RTSP Port.
Enable UPnP Discovery
Select either to enable or disable Enable UPnP Discovery
Login Settings
Configure the login settings.
User Login Timeout
Configure User Login Timeout.
Maximum Consecutive
Failed Login Attempts
Configure Maximum Consecutive Failed Login Attempts.
Login Error Lock Time
Configure Login Error Lock Time.

Table of Contents

Other manuals for Grandstream Networks UCM63 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM63 Series and is the answer not in the manual?

Grandstream Networks UCM63 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM63 Series
CategoryPBX
LanguageEnglish

Related product manuals