GW Instek GDM-906 Series User Manual

SYSTEM & FIRMWARE
133
1. Press the F5 (Enter) key or Knob key first,
the qualified firmware version will show then.
Note: If flash drive has no update files, it
will show as the figure below.
2. Press the NEXT key or scroll Knob key to
move to the Update followed by pressing the
F5 (Enter) key or Knob key to Start update.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English