GDM-906X Series User Manual
148
Firmware Update
This section is for updating the latest firmware.
1. Press the Menu key, the System
configuration menu appears. And
press the NEXT key repeatedly or
scroll the Knob key to move to
the Cali&Update - Firmware field.
2. Press the F5 (Enter) key or
Knob key to enter the Firmware
Update menu.
Prior to update, make sure if the required
firmware file is stored within the flash drive
plugged into the USB port on the front panel.
Also, user can check the current Master and
Slave firmware version respectively in this menu.
To Next Page
Loading...
