MENU SETTING
149
1. Press the F5 (Enter) key or Knob key first,
the qualified firmware version will show then.
Note: If flash drive has no update files, it
will show as the figure below.
2. Press the NEXT key or scroll Knob key to
move to the Update followed by pressing the
F5 (Enter) key or Knob key to Start update.
Security Setting
This section is to change the password and enable or
disable Lan password.
1. Press the Menu key, the System
configuration menu appears. And
press the NEXT key repeatedly or
scroll the Knob key to move to
the Security&Info – Security field.
To Next Page
Loading...
