REMOTE CONTROL
225
20. Press the F5 (Enter) key or
Knob key again to confirm the
input digit for D21. And the
cursor will automatically jump
to next groups.
21. Repeat steps 20 to 21 for D22, D23 and D24.
The Gateway is divided in 4 groups;
D21:D22:D23:D24.
Configure Protocol
The GDM-906X supports 3 Ethernet protocol to used,
including the Web browser, Telnet and TCP.
1. Press the Menu key, and then
the Page Down key repeatedly
until the Lan Setup
configuration menu appears.
2. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the Protocol –
Web field.
To Next Page
Loading...
Need help?
General
