GW Instek GDM-906 Series User Manual

REMOTE CONTROL
219
2. Press the F5 (Enter) key or
Knob key followed by scrolling
Knob key or pressing +/- keys
to land on the ON option.
3. Press the F5 (Enter) key or
Knob key to select the DHCP
ON option.
Configure Ethernet IP
Background
The GDM-906X supports manually setting of the IP
addresses, including the subnet mask, gateway, DNS1 and
DNS2.
NOTE
The IP Address Setup can only be edited if DHCP is off.
IP Address
Configuration
1. Press the Menu key, and then
the Page Down key repeatedly
until the Lan Setup
configuration menu appears.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English