GW Instek GDM-906 Series - Measurement Keys (Basic)

GETTING STARTED
15
DC/AC 3A
Terminal
DC/AC current input
DC: 100μA~3A
AC: 100μA~3A
For details see page 37.
For the fuse replacement procedure, see
page 333.
Sense LO
Terminal
Accepts LO sense line in 4W resistance
measurement. For details, see page 41.
Sense HI
Terminal
Accepts HI sense line in 4W resistance
measurement. For details, see page 41.
Input LO
Terminal
Accepts ground (COM) line in all
measurements except the sense line in
4W Resistance (page 41).
The maximum withstand voltage
between this terminal and earth is
500Vpk.
Input HI
Terminal
Used as an input port for all
measurements except for DC/AC
Current measurements.
DC/AC 10A
Terminal
(GDM-9061 only)
Accepts DC/AC Current input.
For DCI or ACI details, see page 37.
Measurement Keys (basic)
Background
The upper 2 rows of measurement keys are used for
basic GDM-9060/9061 measurements such as voltage,
current, resistance, continuity, diode, frequency, period,
capacitance and temperature. Each key has a primary
and secondary function individually. The secondary
function is accessed in conjunction with the Shift key.