GW Instek GDM-906 Series User Manual

BASIC MEASUREMENT
53
Select Capacitance Range
Auto range
To turn the automatic range selection On/Off,
press the Auto key.
Manual range
Press the “+” or the “-” key to select the range.
The Auto indicator turns to indicating
Manual range selection. If the appropriate range
is unknown, select the highest range.
You can also press the F1 (Range) key to select a
range for the measurement.
Press the F1 ~ F5 key to select a desired range
for the measurement.
Press the F6 (More 1/2) key for next page with
more options as the figure shown below.
Selectable
Capacitance Ranges
Range
Resolution
Full scale
1nF
1pF
1.199nF
10nF
10pF
11.99nF
100nF
100pF
119.9nF
1μF
1nF
1.199μF
10μF
10nF
11.99μF
100μF
100nF
119.9μF
Note
For further details, please see the specifications on page
353.
Note
The refresh rate settings and the EXT trigger cannot be
used in the capacitance mode.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English