GW Instek GDM-906 Series User Manual

GDM-906X Series User Manual
74
Hold Measurement
Applicable to
Background
The Hold Measurement function retains the current
measurement data and updates it only when it exceeds the set
threshold (as a percentage of the retained value).
Activate Hold
measurement
Press the Hold key to activate Hold
measurement.
Hold
measurement
display
appears
Indicator Hold
Measurement
The Latest
Hold Value
Hold
Indicates Hold measurement
+000.6801 mVDC
Shows the latest hold value
Enter hold
settings
Press the Shift + Hold key to activate detailed
setting menu of Hold mode as the figure
below.
F5 (Percent)
key to define
threshold
Press the F5 (Percent) key to show the setting
menu of Hold Percent as the figure below.
Press F1 ~ F4 key to select desired hold
percent. For example, once the measured
value is beyond 10%, which corresponds to
the selected 10% option here, the latest hold
value will be updated on the main reading.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English