GW Instek GDM-906 Series User Manual

GDM-906X Series User Manual
186
Trend Chart
Background
Shift to the Trend Chart display for each measurement.
Step
1. Press the DISP key followed by clicking the
F2 (Display) key, the Display menu appears
where several display options are available for
selection.
2. Press the F3 (TrendChart) key, the screen
shows the Trend Chart mode for
measurement display. The measured value is
presented in the trend chart way for viewing,
along with the maximum digits display
depending on the Digit selection.
Display
Red Sect.
It indicates the currently measured
value in number display.
Green Sect.
It indicates the latest
measurements of 400 counts in
the intuitive trend chart.
Yellow Sect.
The total counts of measurement
with the maximum of 100,000.
Only 400 counts, however, can be
displayed in the trend chart at once.
F3 (VScale)
key to define
vertical scale
Backgro
und
Press the F3 (Scale) key to enter the VScale
Setup menu where Normal and Manual options
are available for selection.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English