GW Instek GDM-906 Series - Page 187

DISPLAY SETTING
187
Normal
Selecting “Normal” allows the vertical scale of
trend chart to be symmetric with the selected
range of measurement.
Red Sect.
The user-specified range for
measurement.
Yellow Sect.
The highest scale (+10)
corresponds to the upper
defined manual range 10V, and
the lowest scale is the relative
value in the opposite spectrum.
Green Sect.
The currently measured value.
Manual
Selecting “Manual” allows user to customize the
available scale for trend chart on display.
Red Sect.
The user-specified highest and
lowest scales. Press the F5 and
F6 keys to set up individually.
Yellow Sect.
Both the highest scale (+11.0000)
and the lowest scale (-9.0000)
correspond to the user-specified
values in the red section.
Green Sect.
The currently measured value.
Purple Sect.
Press the F4 (Auto(Once)) key
to obtain the highest and lowest
scales from the latest 400 counts
of measurements into the trend