GW Instek GDM-906 Series User Manual

GDM-906X Series User Manual
178
7. Press the F5 (Source) key to
enter the SaveRead Source(Log)
menu where user can select
either source to save and read.
Determine the source mode by
further pressing the F1 (Count)
key or the F2 (Recent) key.
“Count” indicates the saved data
log contains the total counts of
measurement, whilst “Recent”
represents each count of
measurement has user-defined
interval in the saved data log. For
details, refer to page 188.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English