REMOTE CONTROL
221
4. Press the F5 (Enter) key or
Knob key to confirm the input
digit for IP1 Address. And the
cursor will automatically jump
to next groups.
5. Repeat the steps 3 to 4 for IP2, IP3 and IP4.
The IP address is divided in 4 groups;
IP1:IP2:IP3:IP4.
6. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the IP Address
Setup – Subnet field.
7. Use the Left/Right keys to
move the cursor followed by
scrolling Knob key or pressing
+/- keys to define Subnet.
Also, you can press Number
keys to directly input a specific
digit.
To Next Page
Loading...
