REMOTE CONTROL
223
12. Press the F5 (Enter) key or
Knob key to confirm the input
digit for G1. And the cursor
will automatically jump to next
groups.
13. Repeat steps 11 to 12 for G2, G3 and G4.
The Gateway is divided in 4 groups; G1:G2:G3:G4.
14. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the IP Address
Setup – DNS1 field.
15. Use the Left/Right keys to
move the cursor followed by
scrolling Knob key or pressing
+/- keys to define DNS1. Also,
you can press Number keys to
directly input a specific digit.
To Next Page
Loading...
