ABORt
Aborts a measurement in progress, returning the instrument to the trigger
idle state.
●Use this to abort a measurement when the instrument is waiting for a
trigger, or for aborting a long measurement or series of measurements.
FETCh[X]?
Waits for measurements to complete and copies all available
measurements to the instrument's output buffer. The readings remain in
reading memory.
X = null or 1 indicate 1
st
display value, X = 2 indicate 2
nd
display value
Example: SAMP:COUN 3
INIT
FETC?
Returns: -4.98748741E-01,-4.35163427E-01,-4.33118686E-01
●The FETCh? query does not erase measurements from the reading
memory. You can send the query multiple times to retrieve the same data.
●You can store up to 10,000 measurements in the reading memory of the
GDM-9060 or 100,000
measurements on the GDM-9061. If reading memory overflows,new
measurements overwrite the oldest measurements stored; the most recent
measurements are always preserved. No error is generated, but the Reading
Mem Ovfl bit (bit 14) is set in the Questionable Data Register's condition
register.
HCOPy:SDUMp:DATA?
Executes TFT LCD screenshot action.
Returns the front panel display image ("screen shot").
Returns a count of data streaming by the image file format of BMP.
To Next Page
Loading...
Need help?
General
