GW Instek GDM-906 Series - Page 310

GDM-906X Series User Manual
310
TRIGger:SOURce?
Returns current trigger source.
Return parameter: IMM | EXT | BUS
OUTPut:TRIGger:SLOPe
Sets the output signal method after each measurement.
Parameter: POSitive | NEGative
Example: OUTP:TRIG:SLOP POS
Sets the output signal as positive pulse after measurement.
OUTPut:TRIGger:SLOPe?
Returns the output signal method after measurement.
Return parameter: POS | NEG