GW Instek GDM-906 Series - SYSTem COMMunication Commands

GDM-906X Series User Manual
316
SYSTem COMMunication Commands
SYSTem:COMMunicate:GPIB:ADDRess
Sets the GPIB address that is only on GPIB communication bus.
Parameter: <NR1> (0 ~ 30) | MIN | MAX | DEF
Example: SYST:COMM:GPIB:ADDR 15
Sets the GPIB address to 15.
SYSTem:COMMunicate:GPIB:ADDRess?
Returns the GPIB address.
Return parameter: <NR1> (0~30)
SYSTem:COMMunicate:LAN:DHCP
Sets the DHCP on/off.
Parameter: 0 | 1 | ON | OFF
Example: SYST:COMM:LAN:DHCP ON
Sets the DHCP on to automaticall get related configuration information.
SYSTem:COMMunicate:LAN:DHCP?
Returns the DHCP state.
Return parameter: 0 | 1, 0=OFF, 1=ON
SYSTem:COMMunicate:LAN:DNS[X]
Sets the DNS address. which X = 1 indicate DNS1, X = 2 indicate DNS2.
Parameter: “<address>”
Example: SYST:COMM:LAN:DNS1 “172.16.1.252”
Sets the DNS1 address to 172.16.1.252.
SYSTem:COMMunicate:LAN:DNS[X]?
Returns the DNS address. which X = 1 indicate DNS1, X = 2 indicate DNS2.
Return parameter: xxx.xxx.xxx.xxx
SYSTem:COMMunicate:LAN:GATeway
Sets the Gateway address.
Parameter: “<address>”
Example: SYST:COMM:LAN:GAT “192.168.31.254”
Sets the Gatway address to 192.168.31.254.
SYSTem:COMMunicate:LAN:GATeway?
Returns the Gateway address.
Return parameter: xxx.xxx.xxx.xxx
SYSTem:COMMunicate:LAN:HOSTname
Sets the hostname.
Parameter: “<string>” , max length = 15 characters
Example: SYST:COMM:LAN:HOST “DMM”
Sets the Hostname to DMM.