GW Instek GDS-1000B Series - Measure:fffdelay; Measure:lrrdelay

To Next Page

To Previous Page

GDS-1000B Programming Manual

102

:MEASure:FFFDelay

Description

Returns the delay between the first falling edge of

source1 and the first falling edge of source2.

Syntax

:MEASure:FFFDelay{?}

Commands

:MEASure:SOURce<X>

Return parameter

<NR3>

Returns the delay.

Chan Off

Indicates the source channel is not

activated.

Note

Select the two source channels before entering this

command.

Example

:MEASure:SOURce1 CH1

:MEASure:SOURce2 CH2

:MEASure:FFFDelay?

-8.89E-6

Select channel 1 and 2 as delay source1/2, and

then measure FFF.

:MEASure:LRRDelay

Description

Returns the delay between the first rising edge of

source1 and the last rising edge of source2.

Syntax

:MEASure:LRRDelay{?}