GW Instek GDS-1000B Series - Data Logging Commands

GDS-1000B Programming Manual
244
Data Logging Commands
The data logging commands are only applicable after the optional
Data Log app has been installed. Please see the user manual for
further details.
:DATALOG:STATE ..................................................... 244
:DATALOG:SOURce .................................................. 244
:DATALOG:SAVe ....................................................... 245
:DATALOG:INTerval .................................................. 245
:DATALOG:DURation ................................................ 246
:DATALOG:STATE
Description
Sets or queries the state of the data logging app.
Syntax
:DATALOG:STATE {OFF|ON|?}
Related
commands
:DATALOG:SOURce
:DATALOG:SAVe
:DATALOG:INTerval
:DATALOG:DURation
Parameter/
Return parameter
OFF
Turns the data logging off.
ON
Turns the data logging on.
Example
:DATALOG:STATE ON
Turns the data logging app on.
:DATALOG:SOURce
Description
Sets or queries the data logging source channel.
Syntax
:DATALOG:SOURce {CH1~CH4|all|?}
Set
Query
Set
Query