GW Instek GDS-1000B Series - Bus1; Bus1:State; Bus1:Type

COMMAND DETAILS
171
:BUS1:LIN:POLARity .................................................183
:BUS1:LIN:SAMPLEpoint ..........................................183
:BUS1:LIN:SOURce ...................................................183
:BUS1:LIN:STANDard ...............................................184
:BUS1
Description
Returns the supported BUS types.
Syntax
:BUS1?
Return Parameter
Returns the supported bus types.
Example
BUS1?
I2C,SPI,UART, CAN, LIN
:BUS1:STATE
Description
Sets or queries the state of the bus.
Syntax
:BUS1:STATE { OFF | ON | ? }
Related
commands
:BUS1:TYPe
Parameter/Return
parameter
OFF
Turns the bus off.
ON
Turns the bus on.
Example
:BUS1:STATE ON
Turns the bus on.
:BUS1:TYPe
Description
Sets or queries the type of bus.
Syntax
:BUS1:TYPe { UART | I2C | SPI | CAN | LIN | ? }
Related
commands
:BUS1:STATE
Query
Set
Query
Set
Query