GW Instek GDS-1000B Series - Cursor:vdelta; Cursor:xy:rectangular:X:delta; Cursor:xy:rectangular:X:position<X

COMMAND DETAILS
69
:CURSor:VDELta
Description
Returns the delta of V1 and V2.
Syntax
:CURSor:VDELta{?}
Return Parameter
<NR3>
Returns the difference between two
vertical cursors.
Example
:CURSor:VDELta?
4.00E+0
Returns the vertical delta as 4 volts.
:CURSor:XY:RECTangular:X:POSition<X>
Description
Sets or queries the horizontal position in XY mode
for the X rectangular coordinates for cursor 1 or 2.
Syntax
:CURSor:XY:RECTangular:X:POSition<X> {<NRf>|?}
Parameter
<X>
Cursor 1, 2
<NRf>
Horizontal position co-ordinates
Return parameter
<NR3>
Returns the cursor position.
Example
:CURSor:XY:RECTangular:X:POSition1 4.0E-3
Sets the X-coordinate cursor 1 position to
40mV/mV.
:CURSor:XY:RECTangular:X:DELta
Description
Returns the delta value of cursor 1 and 2 on the X
coordinate.
Syntax
:CURSor:XY:RECTangular:X:DELta{?}
Return Parameter
<NR3>
Returns the delta value of cursor 1 and 2
as <NR3>.
Query
Set
Query
Query