GW Instek GDS-1000B Series - Set<X>:Label

COMMAND DETAILS
225
Related
commands
:BUS1:LABel
Parameter
OFF
Turns the file label off for the bus.
ON
Turns the file label on for the bus.
Return parameter
Returns the status of the file label for the bus (ON,
OFF).
Example
:BUS1:LABel "Bus"
:BUS1:LABel:DISPlay ON
:BUS1:LABel:DISPlay?
ON
Sets the label for the bus to "Bus" and then turns
the label display on. The query return shows that
the label is on.
:SET<X>:LABel
Description
Sets or returns the file label for the selected setup.
Syntax
:SET<X>:LABel {<string> | ?}
Related
commands
:SET<X>:LABel:DISPlay
Parameter
<X>
Setup number 1 to 20
<string>
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, "string".
Return parameter
<string>
Returns the label for the selected
setup. No return indicates that there
has not been a file label assigned for
the selected setup.
Example1
:SET1:LABel "SET1_lab"
Sets the label for setup 1 as "SET1_lab".
Set
Query