GW Instek GDS-1000B Series - Search:trigger:bus:b1:Lin:data:size; Search:trigger:bus:b1:Lin:data:value

GDS-1000B Programming Manual
216
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe
Description
Sets or returns the length of the data string in bytes
for the LIN search trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Syntax
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe {<NR1>|?}
Parameter/
Return parameter
<NR1>
1~8 (bytes)
Example
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe?
>1
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe 2
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe?
>2
:SEARCH:TRIGger:BUS:B1:LIN:DATa:
VALue
Description
Sets or returns the binary data string to be used for
the LIN search trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Related
Commands
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe
Syntax
:SEARCH:TRIGger:BUS:B1:LIN:DATa:VALue
{<string>|?}
Parameter/
Return parameter
<string>
The size of the string depends on the
data size setting. The string must be
enclosed in double quotes, “string”.
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Set
Query
Set
Query