GW Instek GDS-1000B Series - Measure:gating; Measure:source

GDS-1000B Programming Manual
82
:MEASure:AREa ........................................................... 99
:MEASure:CARea ......................................................... 99
:MEASure:FRRDelay .................................................. 100
:MEASure:FRFDelay .................................................. 100
:MEASure:FFRDelay .................................................. 101
:MEASure:FFFDelay ................................................... 102
:MEASure:LRRDelay .................................................. 102
:MEASure:LRFDelay ................................................... 103
:MEASure:LFRDelay ................................................... 103
:MEASure:LFFDelay ................................................... 104
:MEASure:PHAse ....................................................... 105
:MEASure:GATing
Description
Sets or queries the measurement gating.
Syntax
:MEASure:GATing { OFF | SCREen | CURSor | ? }
Parameter
OFF
Full record
SCREen
Gating set to screen width
CURSor
Gating between cursors
Return parameter
Returns the gating. (OFF, SCREEN, CURSOR)
Example
:MEASure:GATing OFF
Turns gating off (full record).
:MEASure:SOURce
Description
Sets or queries the measurement source for source1
or source2.
Syntax
:MEASure:SOURce<X> { CH1 | CH2 | CH3 | CH4 |
MATH | ? }
Parameter
<X>
Source1 or source2
CH1~CH4
Channel 1 to 4
Set
Query
Set
Query