GW Instek GDS-1000B Series Programming Manual

COMMAND DETAILS
201
Example
:SEARCH:TRIGger:BUS:B1:I2C:ADDRess:DIRection
READ
Sets the direction to READ.
:SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe
Description
Sets or queries the data size in bytes for the I
2
C
bus.
Note
This setting only applies when the I
2
C search
trigger is set to trigger on Data or Address/Data
Syntax
:SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe {<NR1> | ? }
Related
commands
:SEARCH:TRIGger:BUS:B1:I2C:CONDition
Parameter
<NR1>
Number of data bytes (1 to 5).
Return parameter
<NR1>
Returns the number of bytes.
Example
:SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe 3
Sets the number of bytes to 3.
:SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue
Description
Sets or queries the triggering data value for the I
2
C
bus when the I
2
C search trigger is set to trigger on
Data or Address/Data.
Syntax
:SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue
{<string> | ? }
Related
commands
:SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe
Set
Query
Set
Query

GW Instek GDS-1000B Series Specifications

General

Brand	GW Instek
Model	GDS-1000B Series
Category	Test Equipment
Language	English