GW Instek GDS-1000B Series - Save:waveform:fileformat

GDS-1000B Programming Manual
168
Example 3
:SAVe:WAVEform:FILEFormat FCSV
:SAVe:WAVEform ALL, “Disk:/ALL002”
Sets the file format to FCSV(fast CSV format). It
then saves the all channel’s waveforms to the root
directory (Disk:/) of the internal flash disk in the
CSV format (with the filename ALL002.CSV).
Example 4
:SAVe:WAVEform:FILEFormat LSF
:SAVe:WAVEform CH2, “Disk:/DS0003.LSF”
Save the channel 2’s waveform to the root
directory (Disk:/) of the internal flash disk in the
LSF format with DS0003.LSF as the filename.
:SAVe:WAVEform:FILEFormat
Description
Sets the waveform savefile format.
Syntax
:SAVe:WAVEform:FILEFormat {LSF | DCSV | FCSV | ?}
Parameter
LSF
Sets the file format to the GDS 1000B’s
internal file format, LSF. (xxx.LSF)
DCSV
Sets the file format to detail CSV.
(xxx.CSV)
FCSV
Sets the file format to fast CSV.
(xxx.CSV)
Return parameter
Returns the file format (LSF, DCSV, FCSV).
Example
:SAVe:WAVEform:FILEFormat LSF
Sets the file format to LSF.
Set
Query