GW Instek GDS-1000B Series - Search:trigger:bus:b1:Uart:rx:data:size

COMMAND DETAILS
203
Parameter
RXSTArt
Set search trigger on the RX Start
Bit.
RXDATA
Set search trigger on RX Data.
RXENDPacket
Set search trigger on the RX End of
Packet condition.
RXPARItyerr
Set search trigger on RX Parity error
condition.
TXSTArt
Set search trigger on the TX Start
Bit.
TXDATA
Set search trigger on TX Data.
TXENDPacket
Set search trigger on the TX End of
Packet condition.
TXPARItyerr
Set search trigger on TX Parity error
condition.
Return Parameter
Returns the search triggering condition.
Example
:SEARCH:TRIGger:BUS:B1:UART:CONDition TXDATA
Sets the UART bus to trigger on Tx Data for the
search function.
:SEARCH:TRIGger:BUS:B1:UART:RX:DATa:
SIZe
Description
Sets or queries the number of bytes for UART data.
Note
This setting only applies when the UART search
trigger is set to trigger on Rx Data
Syntax
:SEARCH:TRIGger:BUS:B1:UART:RX:DATa:SIZe
{<NR1> | ?}
Related
commands
:SEARCH:TRIGger:BUS:B1:UART:CONDition
Parameter
<NR1>
Number of bytes (1 to 10).
Return parameter
<NR1>
Returns the number of bytes.
Set
Query