GW Instek GDS-1000B Series - Search:trigger:bus:b1:Can:identifier:mode; Search:trigger:bus:b1:Can:identifier:value

GDS-1000B Programming Manual
210
Parameter/
Return parameter
DATA
Sets the frame type to data frame
REMote
Sets the frame type to remote frame
ERRor
Sets the frame type to error frame
OVERLoad
Sets the frame type to overload
Example
:SEARCH:TRIGger:BUS:B1:CAN:FRAMEtype DATA
Sets the frame type to DATA.
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:
MODe
Description
Sets or returns the CAN identifier mode for the
bus.
Syntax
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
{STANDard|EXTended|?}
Parameter/
Return parameter
STANDard
Standard addressing mode
EXTended
Extended addressing mode
Example
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe?
>STANDARD
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
EXTENDED
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe?
>EXTENDED
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:
VALue
Description
Sets or returns the identifier string used for the
CAN search trigger.
Note: Only applicable when the search trigger
condition is set to ID or IDANDDATA.
Syntax
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue
{<string>|?}
Set
Query
Set
Query