GW Instek GDS-1000B Series - Segments:measure:table:list; Segments:measure:table:save; Segments:save

COMMAND DETAILS
233
Related
commands
:SEGMents:TOTalnum
Parameter
<NR1>
1~29000
Return parameter
Returns the number of segments as <NR3>.
Example1
:SEGMents:MEASure:TABle:SELect 10
Select segment number 10.
:SEGMents:MEASure:TABle:LIST
Description
Returns the measurement results of each segment
in the list.
Syntax
:SEGMents:MEASure:TABle:LIST?
Return parameter
Returns the measurements results as a string for
each segment.
Example
:SEGMents:MEASure:TABle:LIST?
>"GW GDS-1074B, serial number PXXXXXX,
version V1.00",Segment Summary : CH1, Seg.,Pk-
Pk (V),Pk-Pk (V),1,8.00m,8.00m……etc
:SEGMents:MEASure:TABle:SAVe
Description
Saves the list of automatic measurement results of
each segment.
Syntax
:SEGMents:MEASure:TABle:SAVe
:SEGMents:SAVe
Description
Saves the segments.
Syntax
:SEGMents:SAVe
Related
Commands
:SEGMents:SAVe:SOURce
:SEGMents:SAVe:SELect:STARt
:SEGMents:SAVe:SELect:END
Query
Set
Set