GW Instek GDS-1000B Series - Search:trigger:bus:b1:I2 C:condition; Search:trigger:bus:type

COMMAND DETAILS
197
:SEARCH:TRIGger:BUS:TYPe
Description
Returns the current bus type.
Syntax
:SEARCH:TRIGger:BUS:TYPe?
Return parameter
12C
I2C mode
SPI
SPI mode
UART
UART mode
CAN
CAN mode
LIN
LIN mode
Example
:SEARCH:TRIGger:BUS:TYPe?
UART
:SEARCH:TRIGger:BUS:B1:I2C:CONDition
Description
Sets or queries the I
2
C search trigger conditions.
Syntax
:SEARCH:TRIGger:BUS:B1:I2C:CONDition
{STARt | STOP | REPEATstart | ACKMISS | ADDRess |
DATA | ADDRANDDATA | ? }
Query
Set
Query